How To Switch off Your Water Main In an Emergency
How To Switch off Your Water Main In an Emergency
Blog Article
We have noticed the article pertaining to How to Turn Off Water To House and Prevent Damage listed below on the web and felt it made sense to write about it with you in this article.
The most typical areas a water main will be situated in residence is in your boiler room, basement, or a removed panel in an area for your home.
When you discover the water pipe you will simply turn the shutoff clockwise to close all the water off in your home until you have completed the fixing. Some homes will have a ball shutoff with a bar that you can draw instead of rely on shut the water off.
If you attempt to close the water off to your components by using an angle stop and that doesn't function you will certainly need to close of the water main to make your repair. There are also numerous other reasons you may need to shut the water main like repairing frozen pipes, repairing leaks, changing fixtures or faucets.
Lots of people are not conscious that they also have a water main valve right in their own home as well as just call a plumber of never wind up doing the repair work up until things get really bad because they merely do not know that closing the water pipe is actually very easy.
How to Find and Shut Off Main Water Shutoff Valve
Where is the main water shutoff valve located?
This is the million-dollar question. Your main water shutoff valve could be located in several different areas. If you have a home with a basement and crawlspace, it is probably located on an interior wall near the front of the house, where the water comes in from the water meter. In this case, it is most likely hiding in plain sight. If your home was built on a slab, the valve might be located near the hot water heater or inside your garage.
How to Turn Off Main Water Valve
Once you find the shutoff valve you will either hand turn it (clockwise for gate valves and perpendicular to the pipe for ball valves) or use the appropriate tool depending on the design.
If it is located inside your house, it will most likely be a gate or “wheel” valve that you’ll simply turn clockwise to stop the flow of water. Another way to shut off the water is to go to the water meter box. Just be careful not to mess with the city shutoff side of the meter.
Where are the isolation valves?
Isolation shutoff valves are much easier to locate. Most essential home plumbing fixtures have separate valves that control the water flow. Sinks, toilets, water heaters, and washing machines should have a small valve located near the plumbing that can easily shut off the individual water supply.
Simply turning the valve clockwise will turn off the water flow. Sink and toilet problems can be dealt with quickly by simply shutting off the supply this way. It’s always good to test the isolation valves periodically to make sure they are working properly.
Again, once your tighten the water shutoff valves and turn off the water, open up your hot and cold lines to release pressure and test if the water is indeed off.
Make it a priority to locate the water valves in your home – and keep plumbing problems from turning into costly repair situations.
https://happyhiller.com/blog/how-to-find-shut-off-main-water-shutoff-valve/
We hope you enjoyed our section on How to Turn off the Water for Plumbing Repairs. Many thanks for finding the time to read our post. In case you enjoyed our page if you please be sure to share it. I appreciate reading our article about How to Turn Off Water To House and Prevent Damage.
Visit Website Report this page